Care Plans
Gastrointestinal Assessment
How to Take Blood Pressure Manually | Clinical Nursing Skills
Learn how to take a manual blood pressure! As a nurse or healthcare professional, it is essential that you know how to take a manual blood pressure, and many nursing students must pass a blood pressure measurement skills check-off in nursing school. The manual blood pressure reading is obtained with a sphygmomanometer (aneroid manometer gauge and blood pressure cuff) and stethoscope.
Once obtained, the nurse records it with the systolic reading (this is the first sound heard) over the diastolic blood pressure reading (the point when the sound stops). For example, a blood pressure reading may look something like this: 114/76. The 114 is the systolic reading and the 76 is the diastolic reading.
Why does a nurse need to know how to check a manual blood pressure when there are digital devices that will perform this skill?
Digital or automatic devices may not be available at all times. In addition, manual blood pressure measurement devices provide a more accurate blood pressure reading than digital ones. According to a study by Journal of Clinical and Diagnostic Research, an aneroid device (which is used during a manual blood pressure measurement) is more accurate than a digital device [1].
Therefore, as a nurse you should always reassess a suspicious blood pressure reading with a manual blood pressure measurement.
Video on How to Take a Blood Pressure Manually
Steps on How to Take a Blood Pressure Manually
Here are the steps to take a manual blood pressure. Note: Before taking a patient’s blood pressure, always verify the specific steps required by your healthcare facility or nursing school, as guidelines or protocols may change over time.
1. Perform hand hygiene and gather your supplies.
- Supplies needed: stethoscope, sphygmomanometer (blood pressure cuff with aneroid manometer gauge), cleaning supplies, towels or pillow for support (if needed)
- Tip: always use an appropriately sized blood pressure cuff
2. Have the patient sitting or lying down with their back supported. Their arm should be positioned at heart level. If necessary, use towels or a pillow to support the arm, and make sure the palms are facing up (supinated). Be sure the legs are also uncrossed. For best results, the patient should urinate before the procedure, avoid eating or drinking anything for 30 minutes before the measurement is taken, and should remain quiet [2].
- Find the brachial artery near the proximal (top) portion of the elbow’s bend (in the cubital fossa area):
- This is the most common site for checking the blood pressure and is a major artery in the upper arm that divides into the radial and ulnar artery.
- To find this artery, extend the elbow joint and have the palm facing upward. The pulse point is found near the top of the cubital fossa, which is a triangular area that is in front of the elbow.
3. Place and secure the blood pressure cuff on the patient’s upper arm. Place it about 2 inches above the elbow. In addition, make sure the arrow on the blood pressure cuff is lined up with the brachial artery. In addition, be sure the cuff is secured over the bare skin, and attach the gauge (aneroid manometer) so that you can easily read it as you palpate.
4. First, we will estimate the systolic pressure by palpating the brachial artery and inflating the cuff to the point where the pulse disappears. Turn the bulb’s valve clockwise to tighten. Make sure the gauge is at zero, and pump until you no longer feel the brachial artery’s pulse. Note that number on the gauge when you no longer feel the brachial artery, as this is the estimated systolic pressure. Then deflate the cuff by turning the bulb’s valve counterclockwise, and wait 30 to 60 seconds.
- Why do we do this? By first estimating the systolic pressure, we can avoid missing the auscultatory gap in certain patients. The auscultatory gap is an abnormal silence during auscultation that can lead the clinician to obtain an inaccurate systolic reading, which is the first sound heard during auscultation. This gap occurs in SOME patients (not all), especially if they have hypertension.
5. Place your stethoscope in your ears, palpate the brachial artery again, and place the bell of the stethoscope lightly on the brachial pulse site (you can use the diaphragm rather than the bell if you want, but the bell is the best for hearing low pitched sounds).
6. Verify the gauge is at zero, and inflate the cuff 30 mmHg above the number at which you felt the brachial artery’s pulse disappear when estimating the systolic pressure. For example, if the brachial artery’s pulse disappeared at 100 mmHg, inflate the cuff to 130 mmHg.
7. Next, deflate the cuff slowly by turning the bulb’s valve counterclockwise until the needle drops at a speed of about 2 mmHg per second.
8. Listen carefully for the very first sound to appear, and note the point on the gauge when you heard it. This is the systolic blood pressure number (top number) of your blood pressure reading.
9. Continue to allow the air to slowly leave the cuff, and note the point on the gauge when the sound stops completely. This is the diastolic blood pressure number, which is the lower number in a blood pressure reading. Note: In the past, the diastolic number may be referred to as the last faint sound heard (also known as the Korotkoff phase 4 sound). However, many newer guidelines suggest the diastolic pressure is the point at which the sound is no longer heard (also known as Korotkoff phase 5, which is silence).
10. Open the bulb’s valve completely by turning it counterclockwise, allowing the cuff to deflate.
11. Remove the cuff from the patient’s arm.
12. Clean the cuff and devices used, and perform hand hygiene.
13. Document per your facility’s protocols, making sure to include necessary information such as the blood pressure reading, the patient’s position (sitting or lying), and the arm used to measure the blood pressure.
No insights found
How to Take Blood Pressure Manually | Clinical Nursing Skills
Learn how to take a manual blood pressure! As a nurse or healthcare professional, it is essential that you know how to take a manual blood pressure, and many nursing students must pass a blood pressure measurement skills check-off in nursing school. The manual blood pressure reading is obtained with a sphygmomanometer (aneroid manometer gauge and blood pressure cuff) and stethoscope.
Once obtained, the nurse records it with the systolic reading (this is the first sound heard) over the diastolic blood pressure reading (the point when the sound stops). For example, a blood pressure reading may look something like this: 114/76. The 114 is the systolic reading and the 76 is the diastolic reading.
Why does a nurse need to know how to check a manual blood pressure when there are digital devices that will perform this skill?
Digital or automatic devices may not be available at all times. In addition, manual blood pressure measurement devices provide a more accurate blood pressure reading than digital ones. According to a study by Journal of Clinical and Diagnostic Research, an aneroid device (which is used during a manual blood pressure measurement) is more accurate than a digital device [1].
Therefore, as a nurse you should always reassess a suspicious blood pressure reading with a manual blood pressure measurement.
Video on How to Take a Blood Pressure Manually
Steps on How to Take a Blood Pressure Manually
Here are the steps to take a manual blood pressure. Note: Before taking a patient’s blood pressure, always verify the specific steps required by your healthcare facility or nursing school, as guidelines or protocols may change over time.
1. Perform hand hygiene and gather your supplies.
- Supplies needed: stethoscope, sphygmomanometer (blood pressure cuff with aneroid manometer gauge), cleaning supplies, towels or pillow for support (if needed)
- Tip: always use an appropriately sized blood pressure cuff
2. Have the patient sitting or lying down with their back supported. Their arm should be positioned at heart level. If necessary, use towels or a pillow to support the arm, and make sure the palms are facing up (supinated). Be sure the legs are also uncrossed. For best results, the patient should urinate before the procedure, avoid eating or drinking anything for 30 minutes before the measurement is taken, and should remain quiet [2].
- Find the brachial artery near the proximal (top) portion of the elbow’s bend (in the cubital fossa area):
- This is the most common site for checking the blood pressure and is a major artery in the upper arm that divides into the radial and ulnar artery.
- To find this artery, extend the elbow joint and have the palm facing upward. The pulse point is found near the top of the cubital fossa, which is a triangular area that is in front of the elbow.
3. Place and secure the blood pressure cuff on the patient’s upper arm. Place it about 2 inches above the elbow. In addition, make sure the arrow on the blood pressure cuff is lined up with the brachial artery. In addition, be sure the cuff is secured over the bare skin, and attach the gauge (aneroid manometer) so that you can easily read it as you palpate.
4. First, we will estimate the systolic pressure by palpating the brachial artery and inflating the cuff to the point where the pulse disappears. Turn the bulb’s valve clockwise to tighten. Make sure the gauge is at zero, and pump until you no longer feel the brachial artery’s pulse. Note that number on the gauge when you no longer feel the brachial artery, as this is the estimated systolic pressure. Then deflate the cuff by turning the bulb’s valve counterclockwise, and wait 30 to 60 seconds.
- Why do we do this? By first estimating the systolic pressure, we can avoid missing the auscultatory gap in certain patients. The auscultatory gap is an abnormal silence during auscultation that can lead the clinician to obtain an inaccurate systolic reading, which is the first sound heard during auscultation. This gap occurs in SOME patients (not all), especially if they have hypertension.
5. Place your stethoscope in your ears, palpate the brachial artery again, and place the bell of the stethoscope lightly on the brachial pulse site (you can use the diaphragm rather than the bell if you want, but the bell is the best for hearing low pitched sounds).
6. Verify the gauge is at zero, and inflate the cuff 30 mmHg above the number at which you felt the brachial artery’s pulse disappear when estimating the systolic pressure. For example, if the brachial artery’s pulse disappeared at 100 mmHg, inflate the cuff to 130 mmHg.
7. Next, deflate the cuff slowly by turning the bulb’s valve counterclockwise until the needle drops at a speed of about 2 mmHg per second.
8. Listen carefully for the very first sound to appear, and note the point on the gauge when you heard it. This is the systolic blood pressure number (top number) of your blood pressure reading.
9. Continue to allow the air to slowly leave the cuff, and note the point on the gauge when the sound stops completely. This is the diastolic blood pressure number, which is the lower number in a blood pressure reading. Note: In the past, the diastolic number may be referred to as the last faint sound heard (also known as the Korotkoff phase 4 sound). However, many newer guidelines suggest the diastolic pressure is the point at which the sound is no longer heard (also known as Korotkoff phase 5, which is silence).
10. Open the bulb’s valve completely by turning it counterclockwise, allowing the cuff to deflate.
11. Remove the cuff from the patient’s arm.
12. Clean the cuff and devices used, and perform hand hygiene.
13. Document per your facility’s protocols, making sure to include necessary information such as the blood pressure reading, the patient’s position (sitting or lying), and the arm used to measure the blood pressure.
No insights found